2D/3D Fashion Product Development Prototype Flamingo Pua III
– Garment pattern development in OptiTex, garment sketch development, engineered garment pattern surface design development, OptiTex 3D simulation test.
palette, print pattern and garment sketch development.
Garment patterns were quickly developed and simulations were visualized using OptiTex PDS.
Ideas for graphics were added to basic silhouette sketches (above) and used as a guide to develop final surface patterns/graphics (below).
Garment patterns were exported from OptiTex and imported into Adobe Illustrator full size (above). All garment pattern lines were set to invisible except perimeter cut lines. Graphics and surface patterns were developed inside the cut lines for each full size garment pattern piece.
Engineered garment surface patterns were tested in the OptiTex PDS 3D application (above).
Next post: 2D/3D Fashion Product Development Prototype Flamingo Pua IV : Clo3D – virtual fashion show
note: If you are an educator and have a 2D/3D apparel/textile product development prototype project that either you or your student(s) created and would like to share with readers of this blog, please contact me at firstname.lastname@example.org
2D/3D Fashion Product Development Prototype Flamingo Pua II: color palette, print pattern and garment sketch development.
2D/3D Fashion Product Development Prototype Flamingo Pua I: inspiration, initial research for concept & silhouette development
copyright © 2012 by Elaine Polvinen all rights reserved.